Skip to content

Marker

A marker is the layout of all the pattern pieces for an order on the width of the fabric, used as the guide for cutting.

How it is made. The pieces for every size being cut are arranged, in software or by hand, to fit the usable width of the fabric with as little waste as possible. The marker is printed on paper and laid on top of the stacked fabric, or sent as a file to an automatic cutter.

Marker efficiency. This is the share of the fabric under the marker that ends up in garments. The rest is waste. It depends on the shapes of the pieces, the fabric width and the mix of sizes. Fabric is usually the largest cost in a garment, so a small gain in efficiency is worth the planning time.

Grain and direction. Every piece has to sit on the grain line marked on its pattern. A piece tilted to save fabric will twist after washing. Fabrics with a direction, such as a shine or a one-way print, need all pieces facing the same way, and that uses more fabric.

Fabric width. A marker is made for one usable width. If the fabric arrives narrower than promised, the marker no longer fits and has to be made again.

On a team order. For sublimated teamwear the marker is also the print file. Each panel is laid out with its artwork, name and number already in place, then printed, pressed and cut. A marker for a team order is specific to that roster and cannot be reused for the next team.

Related: grading, cut and sew, size run.

Updated .

All glossary terms