Skip to content

Custom apparel production stages: from approved order to shipped box

By UniformsOS Team. Updated .

The stages at a glance

Stage What happens What goes wrong The check
1. Pre-production check The order is read against the approved proof and the roster Missing sizes, unapproved art, duplicate numbers Nothing is released until the proof is signed and the roster is complete
2. File preparation Art is scaled to every size and laid out for printing with names and numbers The wrong name on the wrong size Every panel carries the order number, size and player
3. Test print A sample is printed on the real fabric Colors shift from the screen to the fabric Compare to the approved color reference before the full run
4. Printing and heat transfer The design is printed on paper and pressed into the fabric Ghosting, banding, light patches Inspect panels as they come off the press
5. Cutting Printed panels are cut to shape Panels cut off-register, mixed sizes Keep each jersey's panels bundled together
6. Sewing Panels are assembled, hemmed and labeled Wrong panels joined, weak seams, wrong size label Check the first piece of each size before the rest are sewn
7. Quality control Every piece is checked against the order Something from stages 2 to 6 that nobody caught Count, measure and read every name and number against the roster
8. Packing Pieces are sorted, bagged and boxed The right jerseys in the wrong bags Pack from the roster, one player at a time

1. Pre-production check

This is the gate. Before anything is printed, one person confirms four things: the proof is approved, the roster is complete, every size has a quantity, and the deposit is in.

The work done here is small and the cost of skipping it is large. A duplicate number caught now is a message to the coach. Caught at packing, it is a remake.

Hold orders that fail the check, and tell the customer the same day what is missing. The ship date does not start until the order is released.

2. File preparation

The approved design is one picture. Production needs a separate file for every panel of every size, with each player's name and number in place.

A youth small and an adult 2XL are not the same artwork scaled up. Logos, numbers and stripes have to be placed for each size so they sit correctly on the body.

The risk is in the personalization. A roster of 40 players is 40 chances to put the right name on the wrong size. Each panel should carry a small printed tag in the seam allowance with the order number, the size and the player, so anyone on the floor can tell what it is.

3. Test print

A printed sample on the production fabric, often called a strike-off. Sublimation colors change with the fabric, the paper, the ink and the press settings, so the only reliable proof is a print.

For a repeat customer with an approved color standard, the test can be a small swatch checked in-house. For a new customer or a brand color that has to be exact, send it or photograph it next to the reference in daylight and get a yes in writing.

4. Printing and heat transfer

The files are printed in mirror image onto transfer paper. Paper and fabric then go through a heat press together. Flat presses handle cut pieces. Rotary presses, also called calenders, run fabric and paper continuously from rolls.

The common faults:

  • Ghosting. A blurred double image, caused by the paper shifting while it is still hot.
  • Banding. Fine lines across the print from a clogged print head.
  • Light or uneven color, from temperature, pressure or time being off.
  • White creases, where the fabric was folded in the press.

All of them are visible at once, and none can be fixed later. Check panels as they come off, not at the end of the run.

5. Cutting

Printed panels are cut from the fabric, by hand, with a die or with a laser cutter. The cut has to follow the printed outline exactly, or stripes and side panels will not line up when the jersey is sewn.

After cutting, the panels for each jersey are bundled together: front, back, sleeves and trim, with the tag showing. A floor that mixes loose panels of different sizes will sew a medium front to a large back.

6. Sewing

Operators assemble the bundles: shoulders, sleeves, side seams, collar, hems and labels. The stitch types are covered in stitch types in sportswear.

Check the first finished piece of each size against the spec before the rest are sewn. A wrong seam setting found on piece one costs a minute. Found on piece sixty, it costs the order.

Size labels deserve their own attention. A correctly made large with a medium label is a wrong jersey as far as the parent is concerned.

7. Quality control

Final inspection checks each piece four ways:

  1. Count. The number of pieces matches the order, by size.
  2. Identity. Every name and number matches the roster, spelled exactly.
  3. Measurements. A sample of each size is measured against the spec.
  4. Appearance. Print quality, seams, loose threads, marks.

Pieces that fail go straight back for a remake, and the order's status changes so that customer service knows before the customer asks.

8. Packing

Pack from the roster, not from the pile. One player at a time: jersey, shorts and anything else they ordered, into one bag with a label showing the name, number and sizes.

Bags are grouped by team and boxed with a packing list on top. The person who opens the box should be able to hand out the order without sorting anything.

Other decoration methods

Method Stages that differ
Screen printing Separations and screens are made before printing. Garments are printed one color at a time, then cured in a dryer
Embroidery The logo is digitized into a stitch file. Garments are hooped, stitched, trimmed and the backing is removed
DTF and heat transfers Transfers are printed, then pressed onto finished garments. There is no cutting or sewing

The first and last stages are the same for every method: the pre-production check, quality control and packing.

Where orders really get delayed

Before production. Waiting for proof approval, waiting for the last sizes and waiting for a deposit take more days from most orders than any stage on the floor.

Count those days. Track the time from order to release separately from the time from release to ship. If the first number is the larger one, the fix is in approvals and reminders, not in the factory.

Tracking the stages after release is the job of the WIP report.

Stages in UniformsOS

In UniformsOS a factory reports each purchase order against a fixed list of floor stages: design, test print, sublimation, transfer, cutting, checking, stitching, labeling, packing, final check and shipped. Those roll up into the stage shown on the order, with the days in that stage and a schedule label. See Production WIP.

FAQ

What are the stages of custom apparel production?
For sublimated uniforms: pre-production check, file preparation, test print, printing and heat transfer, cutting, sewing, quality control and packing.
What is a strike-off?
A test print on the production fabric, used to approve color and placement before the full run.
Why do custom orders take weeks when printing takes minutes?
Most of the time goes to approvals, file preparation for each size and player, cutting, sewing, inspection and waiting in line behind other orders.
What causes ghosting in sublimation?
The transfer paper moving against the fabric while both are still hot, which prints a faint second image.
Who should approve the pre-production check?
One named person who did not write the order. A second set of eyes is the point.

Try UniformsOS free for 30 days

30-day free trial, every module on, no card needed.

All articles