Skip to content

AQL (acceptance quality limit)

AQL, or acceptance quality limit, is the worst level of defects a buyer agrees to accept in a production lot, used to decide by sampling whether the lot passes inspection.

How it works. Nobody opens every piece of a 5,000-piece order. An inspector pulls a sample and counts defects. The sampling tables in ISO 2859-1 give two numbers: how many pieces to pull for the size of the lot, and how many defects are allowed at the chosen AQL. At or under that number, the lot passes. Over it, the lot fails.

Defect classes. Defects are sorted before they are counted.

Class Meaning Example
Critical Unsafe, or against regulations A broken needle tip left in a seam
Major The customer would send it back A wrong size label, a hole, a misspelled name
Minor A flaw most customers would not act on A loose thread end

Usual levels for apparel. AQL 2.5 for major defects and 4.0 for minor ones is the common starting point. Critical defects are normally not accepted at all.

What it does not mean. AQL 2.5 is not permission to ship 2.5 percent bad pieces, and a passed lot is not a perfect lot. Sampling gives a decision on the whole lot from a part of it. Some defects will be in the cartons nobody opened.

What to write in the purchase order. The AQL for each defect class, who inspects, when, and what happens to a lot that fails: sorting and repair at the factory's cost, then a second inspection.

On small custom orders. Sampling is for lots of identical pieces. A 40-piece team order with a name and number on every jersey gets a full check against the roster, because one wrong name is a remake.

Related: purchase order, tech pack, lead time.

Updated .

Sources

All glossary terms