AQL inspection for apparel: sample sizes, limits and a final checklist
By UniformsOS Team. Updated .
AQL is how a buyer and a factory agree, before production, on what a passed shipment looks like. You do not open every carton. You pull a set number of pieces at random, count the defects, and the count decides whether the lot ships. This guide shows how to read the table, what the table does not protect you from, and the checklist we would run on a team order.
What AQL means
AQL stands for acceptance quality limit. It is the worst average defect rate you are willing to live with across many shipments from the same factory. The sampling tables come from the standard ANSI/ASQ Z1.4, and the same plans are published internationally as ISO 2859-1.
You make three choices, and they belong in the purchase order:
- Lot size. The number of pieces in the shipment being inspected.
- Inspection level. General Level II is the default when the order does not say otherwise. Level I samples fewer pieces and Level III samples more.
- The AQL for each class of defect. A common setup for apparel is zero critical defects, 2.5 for major defects and 4.0 for minor defects.
The sampling table
General Level II, single sampling, normal inspection:
| Lot size | Code letter | Pieces to inspect | AQL 2.5: accept / reject | AQL 4.0: accept / reject |
|---|---|---|---|---|
| 91 to 150 | F | 20 | 1 / 2 | 2 / 3 |
| 151 to 280 | G | 32 | 2 / 3 | 3 / 4 |
| 281 to 500 | H | 50 | 3 / 4 | 5 / 6 |
| 501 to 1,200 | J | 80 | 5 / 6 | 7 / 8 |
| 1,201 to 3,200 | K | 125 | 7 / 8 | 10 / 11 |
| 3,201 to 10,000 | L | 200 | 10 / 11 | 14 / 15 |
| 10,001 to 35,000 | M | 315 | 14 / 15 | 21 / 22 |
Accept is the most defective pieces the sample can hold and still pass. One more and the lot fails.
A worked example
An order of 600 jerseys falls in the 501 to 1,200 row. The inspector pulls 80 pieces at random, spread across cartons, colors and sizes.
- Critical defects: one is enough to fail the lot.
- Major defects at AQL 2.5: up to 5 pieces pass. At 6 the lot fails.
- Minor defects at AQL 4.0: up to 7 pieces pass. At 8 the lot fails.
Each class is counted on its own. A lot can pass on minor defects and fail on major ones.
Defect classes for team apparel
| Class | What it means | Examples |
|---|---|---|
| Critical | Unsafe for the wearer | A broken needle tip left in a seam, a sharp edge on a trim |
| Major | The customer would send it back | Wrong size label, open seam, hole, a number or logo clearly out of position, panels that do not match in shade, a measurement outside tolerance |
| Minor | Most customers would not notice | An untrimmed thread, light puckering, a small mark inside the garment |
Write your own list into the purchase order with photos where you can. The factory and the inspector should grade the same defect the same way.
What AQL will not catch
- It is a sample. A lot that passes can still hold defective pieces. AQL 2.5 is not a promise that 2.5 percent or less of this shipment is defective.
- Personalization. Every jersey with a name and number is one of one. Checking 80 pieces out of 600 says nothing about the other 520. Names, numbers and sizes are checked piece by piece against the roster.
- Small lots. Under about 90 pieces the plans shrink to a handful of pieces. For a team order of 15 or 40, skip the table and check every piece.
Final inspection checklist
- Count. Quantities by style, color and size against the purchase order.
- Roster. Every name, number and size against the roster, on every piece.
- Measurements. Key points against the spec sheet on several pieces per size, inside the agreed tolerance.
- Color. Body and trim against the approved strike-off or lab dip, under the same light.
- Decoration. Placement, size and straightness. Measure number heights with a ruler.
- Construction. Seams closed, the stitch type that was specified, no skipped stitches, threads trimmed.
- Labels. Fiber content, country of origin, care and size, plus a tracking label on children's products. See the US labeling rules.
- Packing. Bagged and labeled the way the order says, by player or by size. Carton marks and the packing list match what is inside.
When to inspect
- First pieces off the line. This is the cheapest moment to catch a wrong color, a wrong number style or a bad measurement.
- Final inspection. Do it when production is finished and most of the order is packed, so the sample comes from the real shipment.
If the lot fails
Settle this in the purchase order before production starts: who sorts the lot, who pays for the second inspection, and how many days a remake gets. The usual sequence is that the factory sorts every piece, repairs or remakes the defective ones, and the lot is inspected again from the start.
For the other terms a purchase order needs, see managing factories and purchase orders. For a factory you have not used before, see how to vet a custom apparel manufacturer.
Remakes and late orders in UniformsOS
UniformsOS does not run the sampling for you. It keeps the record around it. A factory reports each purchase order through a fixed list of stages that includes checking and final check. When pieces have to be made again, you or the factory raise a redo request on the purchase order with a reason: color, sizing, defect, quality or a missing item. An approved request becomes a redo order with its own purchase order. Each factory's page counts its open redo requests and its late purchase orders. See Manufacturers and Vendors and Production WIP.
FAQ
- What does AQL 2.5 mean?
- It is the sampling plan tied to an acceptance quality limit of 2.5. For a given lot size it tells you how many pieces to inspect and how many defective pieces the sample can hold before the lot fails.
- Is AQL 2.5 the same as allowing 2.5 percent defects?
- No. It describes the average quality a factory needs to hold for its lots to keep passing. A single lot with more than 2.5 percent defects can still pass a sample, and a better lot can fail one.
- What AQL is normal for clothing?
- Many apparel buyers use General Level II with 2.5 for major defects, 4.0 for minor defects and zero critical defects. Premium product often uses tighter limits.
- What is General Inspection Level II?
- It is the standard setting that links lot size to sample size. Level I uses smaller samples and suits a factory with a strong record. Level III uses larger samples for new factories or high risk orders.
- Do I need AQL on a small team order?
- No. Check every piece. Sampling earns its keep on larger runs of the same item.
Sources
- ASQ/ANSI Quality Standards Z1.4 and Z1.9 (ANSI/ASQ Z1.4-2003 (R2018), Sampling Procedures and Tables for Inspection by Attributes), American Society for Quality
- ISO 2859-1, Sampling procedures for inspection by attributes. Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection, International Organization for Standardization
- Acceptable Quality Limit (AQL): tables and calculator, QIMA
- Anatomy of the ANSI ASQ Z1.4 industry-standard AQL table, Global Sources
- 2.5 AQL chart for clothing inspection, Apparel Search
- 4.0 AQL chart for clothing inspection, Apparel Search
Related articles
- How to vet a custom apparel manufacturerFive steps to vet an apparel factory before you send it real orders: fit, the questions to ask, a paid sample, references and audits, and a small first order.
- Managing apparel factories and purchase ordersHow to run day-to-day work with apparel factories: what a purchase order must contain, splitting orders, confirmations, status updates, changes and receiving.
- Tech pack checklist: the ten parts a factory needsA checklist of the ten parts of an apparel tech pack, what each must contain, the gaps factories complain about most and how to test yours before sending it.
See UniformsOS on a live workspace
Thirty minutes on Google Meet with someone who has run a production floor on this system.
