Skip to content

Flatlock stitch

A flatlock stitch joins two pieces of fabric edge to edge with a seam that lies flat on both sides, so nothing raised sits against the skin.

On an industrial flat seamer it is made with four needles and six threads, and it is stitch class 607 in ASTM D6193 and ISO 4915. The fabric edges are trimmed, butted together and covered by thread above and below.

Where it is used. Compression wear, base layers, leggings, swimwear and fitted jerseys. Anywhere a normal seam allowance would chafe.

Why it works. The seam stretches with the fabric and adds almost no bulk. The ladder of threads on the surface is often shown off in a contrast color.

The trade-offs. It needs a dedicated machine, uses a lot of thread and is slower to sew than an overlock seam. It is also harder to open and repair.

One point of confusion. A home serger can make a two- or three-thread "flatlock" by sewing a seam and pulling it flat. That is a different and weaker stitch from the industrial 607 flat seam.

Related: the sportswear stitch types article, cut and sew.

Updated .

All glossary terms