Skip to content

Stitch types in sportswear: what a jersey is sewn with

By UniformsOS Team. Updated .

Why the numbers matter

"Overlock the side seams" means different things in different factories. Three threads or four? One needle or two? A class number removes the question. 514 is a four-thread overedge stitch in every factory in the world.

Two standards define the numbers. ASTM D6193 is the US standard practice for stitches and seams. ISO 4915 is the international standard for stitch types. They use the same three-digit numbers for the common stitches, so a tech pack written to one is read correctly by a factory that works to the other.

The first digit is the class.

Class Family How it is formed
100 Single-thread chainstitch One needle thread looped through itself
200 Hand stitch Stitches first made by hand, now also by machine
300 Lockstitch A needle thread locked with a bobbin thread
400 Multi-thread chainstitch Needle threads looped with a looper thread underneath
500 Overedge Threads wrapped around the cut edge of the fabric
600 Covering stitch Needle threads, a looper thread underneath and a cover thread on top

The stitches on a jersey

Stitch Class Needles and threads Stretch Where it goes
Lockstitch 301 1 needle, 2 threads Low Labels, plackets, pockets, woven trims
Zigzag lockstitch 304 1 needle, 2 threads Medium Tackle twill letters and numbers, elastic
Chainstitch 401 1 needle, 2 threads Medium Waistbands, binding, long seams on wovens
Coverstitch 406 2 needles, 3 threads High Sleeve and bottom hems, topstitching over seams
Three-thread overlock 504 1 needle, 3 threads High Edge finishing, light seams
Four-thread overlock 514 2 needles, 4 threads High Side, shoulder and sleeve seams on knits
Top and bottom coverstitch 602 or 605 2 or 3 needles, 4 or 5 threads High Flat decorative seams, binding, collars
Flatlock 607 4 needles, 6 threads High Panel seams on compression and fitted garments

Lockstitch (301)

This is the stitch a home sewing machine makes. A needle thread and a bobbin thread lock together in the middle of the fabric. It looks the same on both sides, it does not run when a thread breaks, and it uses the least thread of any stitch here.

It also stretches the least. Pull a lockstitched seam on a knit and the thread breaks before the fabric gives. So on a jersey you find it only where the fabric is not meant to stretch: sewing in a label, setting the button placket on a baseball jersey, attaching a pocket or a woven patch. Bartacks, the short dense reinforcements at stress points, are lockstitch as well.

The bobbin is its weak point in production. It holds a limited amount of thread, and changing it stops the machine.

Chainstitch (401)

A needle thread passes through the fabric and is looped with a separate looper thread underneath. The top looks like a lockstitch. The underside shows a chain.

There is no bobbin, so the machine runs longer and faster. The seam stretches more than a lockstitch. The trade-off is security. If the thread end is not locked off, a chainstitch can unravel back along the seam.

In sportswear it sews long seams on woven shorts and pants, attaches waistbands, usually with several needles side by side, and sets binding.

Overlock (504 and 514)

An overlock trims the fabric edge and wraps thread around it in one pass. It is also called an overedge stitch or serging. It joins two panels and finishes the raw edge at the same time, and it stretches with the fabric. It is the main construction stitch on knit garments.

504 uses one needle and two loopers, three threads in all. It finishes edges and makes light seams.

514 adds a second needle and a fourth thread. The extra row of needle stitching makes the seam more secure, which is why it is the usual choice for side seams, shoulders and sleeves on jerseys.

An overlocked seam leaves a seam allowance standing up inside the garment. On a loose jersey nobody notices. On a tight garment it can rub.

Coverstitch (406, 602 and 605)

Look at the hem of any T-shirt. Two parallel rows of stitching show on the outside and a looped pattern on the inside. That is a 406: two needles and one looper thread. It holds a folded hem flat and stretches with it.

The same stitch is run over an overlocked seam to hold the allowance down. You see it on shoulder seams and around armholes.

The 600-class versions add a cover thread on top, so the looped pattern shows on both faces. 602 has two needles and 605 has three. They are used for decorative seams, for binding necklines and for the flat finished look on performance wear.

Flatlock (607)

Four needles and six threads. The two panels are trimmed and butted edge to edge, not stacked, and the stitch covers the join on both faces. There is no seam allowance.

It is the seam on compression tops, base layers, leggings and fitted training gear, where anything raised would chafe. It needs a dedicated machine. It is slower than an overlock and uses far more thread, so it costs more per seam. More in the flatlock stitch entry.

Zigzag (304)

A lockstitch that swings from side to side. The swing gives it stretch that a straight lockstitch does not have.

On team uniforms its main job is tackle twill. Letters and numbers cut from twill are placed on the jersey and sewn down around every edge with a tight zigzag. It also attaches elastic.

A basketball jersey, seam by seam

Part Usual stitch
Side seams 514 four-thread overlock
Shoulder seams 514, often with a 406 coverstitch on top
Neck and armhole binding 406 or 605 coverstitch with a binding attachment
Bottom hem 406 coverstitch
Brand and size label 301 lockstitch
Twill numbers, if the jersey has them 304 zigzag

A compression shirt swaps the 514 seams for 607 flatlock. A baseball jersey adds lockstitch work on the button placket.

What to put in a tech pack

  1. The stitch class for every seam and hem, by number.
  2. Stitches per inch. Most knit teamwear is sewn at 10 to 14. Fewer stitches sew faster and hold less. Too many can pucker or damage a light knit.
  3. Needle spacing for coverstitch hems, such as 1/4 inch.
  4. Thread. Polyester for strength and colorfastness. Textured polyester in the loopers where the seam touches skin, because it is softer.
  5. The seam type. ASTM D6193 covers seams as well as stitches. ISO covers them separately, in ISO 4916.

See the tech pack entry for the rest of the document.

Seam problems and what causes them

Problem Usual cause
Thread breaks when the seam is stretched A low-stretch stitch on a stretch fabric, or too few stitches per inch
Seam puckers Thread tension too high, or too many stitches for the fabric
Small holes along the seam A needle that is too large, damaged or the wrong point for knits
Seam unravels from the end A chainstitch or coverstitch that was not secured
Seam rubs the skin An overlock allowance on a tight garment. Use flatlock, or cover the seam

FAQ

What stitch is used for jersey side seams?
A four-thread overlock, class 514, on most knit jerseys. Tight-fitting garments use a flatlock, class 607.
What is the difference between an overlock and a coverstitch?
An overlock wraps the cut edge and joins panels. A coverstitch sits in from the edge and holds a hem or a seam flat. Most jerseys use both.
Is a serger the same as an overlock machine?
Yes. Serger is the common name in North America, mostly for home machines. Factories say overlock or overedge.
Why do seams pop on cheap jerseys?
Usually a lockstitch where an overlock should be, or too few stitches per inch. The thread cannot stretch as far as the fabric does.
What do ASTM D6193 and ISO 4915 cover?
Both classify stitches by three-digit numbers. ASTM D6193 also covers seams. ISO puts seams in a separate standard, ISO 4916.

Sources

Try UniformsOS free for 30 days

30-day free trial, every module on, no card needed.

All articles