Overlock
An overlock is a stitch that wraps thread around the cut edge of the fabric as it sews, trimming the edge and closing the seam in one pass.
The names. Overlock, overedge and serging are the same family: the 500 class in ASTM D6193 and ISO 4915. The machine is an overlocker, or a serger in home sewing.
The two that matter on a jersey.
| Stitch | Class | Needles and threads | Use |
|---|---|---|---|
| Three-thread overlock | 504 | 1 needle, 3 threads | Edge finishing, light seams |
| Four-thread overlock | 514 | 2 needles, 4 threads | Side, shoulder and sleeve seams on knits |
The second needle on a 514 adds a row of stitching that backs up the seam, which is why it is the usual choice for joining panels.
Why knits are sewn with it. The loops give, so the seam stretches with the fabric. A lockstitch on the same seam breaks before the fabric gives. The cut edge is also wrapped, so it cannot fray or curl.
What it looks like inside. A seam allowance wrapped in thread, standing up on the inside of the garment. That ridge is the trade-off. On a loose jersey nobody feels it. On a tight garment it can rub, and that is where a flatlock seam is used.
What goes wrong.
- Wavy or stretched seams, from the fabric feeding unevenly. The machine's differential feed is there to correct it.
- Seams that open under stretch, from loose tension or too few stitches per inch.
- The knife trimming too much or too little, which changes the finished measurement.
On a spec. Give the class number, not just "overlock". Three threads or four is a real difference in the strength of the seam.
Related: coverstitch, flatlock stitch, cut and sew.
Updated .
Sources
- ASTM D6193, Standard Practice for Stitches and Seams, ASTM International
- ISO 4915:1991, Textiles. Stitch types. Classification and terminology, International Organization for Standardization
Articles that use this term
- Stitch types in sportswear: what a jersey is sewn withLockstitch, chainstitch, overlock, coverstitch, flatlock and zigzag, with their ASTM D6193 and ISO 4915 class numbers and where each one goes on a jersey.
- Tech pack checklist: the ten parts a factory needsA checklist of the ten parts of an apparel tech pack, what each must contain, the gaps factories complain about most and how to test yours before sending it.
