Skip to content

Coverstitch

A coverstitch is a stitch made with two or three needles and a looper, which sews parallel rows of straight stitching on the outside and covers the raw edge with looped thread on the inside.

How to recognize it. Look at the hem of a T-shirt. There are two rows of stitching on the outside and a web of looped thread on the inside. That is a two-needle coverstitch, class 406 in ASTM D6193 and ISO 4915.

Where it goes. Sleeve hems and bottom hems on knits, and topstitching over seams to hold them flat. On a jersey it is the standard hem.

Why it is used. It stretches with the fabric, so a hem does not pop when the garment is pulled on. It also turns the hem and covers the cut edge in one pass.

Top and bottom coverstitch. Classes 602 and 605 add a cover thread on the outside as well, so both sides show a web of thread. They are used for flat decorative seams, binding and collars.

What goes wrong.

  • Tunneling. The fabric rises into a ridge between the needle rows, usually from tension that is too tight for a light fabric.
  • Skipped stitches, which leave a gap that opens under stretch.
  • Unraveling. A coverstitch can run back from its end if the last stitches are not secured, so the end is crossed by another seam or tacked down.
  • Wavy hems, from stretching the fabric as it feeds.

On a spec. Give the class number, the distance between the needles, the thread and the stitches per inch. "Coverstitch the hem" leaves all four to the factory.

Coverstitch and flatlock. The two get confused. A coverstitch sews over fabric that is folded or already seamed. A flatlock joins two cut edges butted together.

Related: overlock, flatlock stitch, tech pack.

Updated .

Sources

All glossary terms