Skip to content

DTF (direct to film)

DTF, or direct to film, is a decoration method in which a design is printed on a film, coated with adhesive powder and heat-pressed onto the garment.

How it works. A printer lays down colored ink and then a white layer on a clear film. Adhesive powder is applied to the wet ink and melted. The film is pressed onto the garment, typically at 300 to 325°F for 10 to 15 seconds, and peeled away. Polyester is pressed cooler, around 270 to 300°F, so the garment dye does not bleed into the print.

What it is good at. It works on cotton, polyester and blends, on light or dark garments, in full color, with no screens and no minimum. That makes it the usual answer for short runs, a reorder of three pieces, a sponsor logo added late and names on stock jerseys.

Transfers keep. A printed transfer can be stored and pressed later. A shop can print a team's names once, press what was ordered and hold the rest for late additions. Many shops buy their transfers from a supplier and own only a heat press.

The limits. The print sits on top of the fabric. Small designs feel fine. Large solid areas feel like a film and do not breathe. Durability is good when it is pressed correctly, and below sublimation and tackle twill.

DTF and DTG. DTG, direct to garment, prints ink straight onto the shirt and is mostly used on cotton. DTF prints on film first, so it is not tied to one fabric.

DTF and screen printing. Screen printing costs less per piece once the run is large and the colors are few. DTF costs about the same per piece at any quantity, so it wins on small runs and loses on big ones.

Related: screen printing, sublimation, MOQ.

Updated .

All glossary terms