Sublimation, screen printing, embroidery, tackle twill or DTF: how to choose jersey decoration
By UniformsOS Team. Updated .
The five methods at a glance
| Method | How it works | Best on | Feel | Makes sense for |
|---|---|---|---|---|
| Sublimation | Dye is printed on paper, turned to gas by heat and bonded into polyester fibers | White or light polyester | None. It is part of the fabric | Full-color team jerseys at any quantity |
| Screen printing | Ink is pushed through a mesh screen, one screen per color, then cured | Cotton and blends | A layer of ink, light to heavy | Runs of a few dozen and up in one to four colors |
| Embroidery | Thread is stitched from a digitized file | Polos, caps, jackets, heavier knits | Raised and textured | Small logos, staff and coaches' wear |
| Tackle twill | Twill letters and numbers are cut out and sewn onto the garment | Football, hockey and baseball jerseys | Layered and stitched | Premium names and numbers |
| DTF | The design is printed on film with adhesive and heat-pressed on | Cotton, polyester and blends, light or dark | A thin flexible film | Short runs, one-offs, names on stock jerseys |
Sublimation
Sublimation ink is a dye. It is printed onto transfer paper, then pressed against the fabric at roughly 380 to 400°F. The heat turns the dye into gas, and the gas bonds with the polyester fibers. When the fabric cools, the color is inside it.
Three things follow from that.
It only works on polyester. Cotton does not hold the dye. On a blend, only the polyester part takes color, so the print looks faded.
There is no white ink. White in the design is the fabric showing through, so the base fabric has to be white or very light. A black sublimated jersey is white fabric dyed black in the press.
Coverage and variety are free. Panels are usually printed before the jersey is sewn, so the design can run across seams and side panels. Every jersey can carry a different name and number with no extra setup, because each one is printed from its own file anyway.
The cost per piece is fairly flat. Ten jerseys are practical, and so are five hundred. The trade-off is time. Most sublimated jerseys are cut and sewn to order, which takes longer than decorating a blank. Exact color matches also take a test print, because the same file prints differently on different fabrics.
Screen printing
Each color in the design needs its own screen. Ink is pushed through the open areas of the mesh onto the garment, one color at a time, then cured with heat. Standard plastisol ink cures at around 320°F.
The setup is where the cost is. Films, screens and registration have to be done before the first shirt is printed. After that, each print costs very little. So the price per piece falls quickly with quantity, and every extra color adds a screen.
Polyester is the hard case. Under heat, the dye in a polyester garment can migrate into the ink. A white print on a red jersey turns pink a day later. Printers deal with it using low-bleed inks, blocking underbases and lower cure temperatures.
Screen printing is the right tool for cotton tees, hoodies, practice shirts and fan wear in volume. It is the wrong tool for individual names and numbers, since each one would be its own setup.
Embroidery
Artwork is converted into a stitch file. This is called digitizing, and it is usually a one-time charge per design. The machine then stitches the design through the garment, with a backing behind the fabric to keep it stable. Price follows stitch count.
Embroidery looks and wears well on stable fabrics. On thin, stretchy performance fabric, dense stitching puckers, and the backing can rub against the skin. Small lettering has a floor. Below about a quarter inch in height, letters fill in and stop being readable.
Use it for chest logos on polos, quarter-zips, jackets and caps.
Tackle twill
Letters and numbers are cut from polyester twill, often in two layers for an outline, placed on the jersey and sewn down around the edges with a zigzag stitch. It is the stitched look of traditional football, hockey and baseball jerseys.
It lasts as long as the garment. It also adds weight and stiffness, and every name and number is cut and sewn by a person or a programmed machine, so it costs more per piece than any printed method. On lightweight jerseys built for airflow it is less common for that reason.
DTF
DTF stands for direct to film. A printer lays down colored ink and a white layer on a clear film. Adhesive powder is applied and melted. The film is then heat-pressed onto the garment, typically at 300 to 325°F for 10 to 15 seconds, and peeled away. Polyester is pressed cooler, around 270 to 300°F, so the garment dye does not bleed into the print.
It works on cotton, polyester and blends, on light or dark garments, in full color, with no minimum. That makes it useful for short runs, reorders of three pieces, sponsor logos added late and names on stock jerseys.
The print sits on top of the fabric. Small designs feel fine. Large solid areas feel like a film and do not breathe. Durability is good when it is pressed correctly, but it is below sublimation and twill.
How to choose
- Start with the fabric. Polyester performance jersey: sublimation. Cotton: screen printing or DTF.
- Look at how many pieces are identical. Every piece different, with names and numbers: sublimation, twill or DTF. Hundreds the same: screen printing.
- Look at the design. Full coverage, gradients or many colors: sublimation. One or two solid colors: screen printing.
- Decide on the look. Stitched and traditional: tackle twill. A raised logo: embroidery.
- Check the deadline. Decorating stock blanks is faster than cutting and sewing a sublimated jersey from scratch.
Mixing methods
Shops combine them all the time. A sublimated football jersey with tackle twill numbers. A screen-printed practice tee with DTF names. A sublimated warmup with an embroidered crest. The rule is one method per job it does best.
What drives the cost
| Method | The cost is driven by |
|---|---|
| Sublimation | Fabric and sewing labor. Colors are free |
| Screen printing | Setup per color, then very little per print |
| Embroidery | Stitch count |
| Tackle twill | The number of pieces and layers sewn on |
| DTF | The printed area |
Keeping decoration straight across orders
The decoration method changes what the factory needs, how long the job takes and what it costs. In UniformsOS it is part of the product record, next to variants and pricing, so the quote and the order carry the same spec. See Products and SKUs.
FAQ
- Does sublimation crack, peel or fade?
- It does not crack or peel, because there is no layer sitting on the fabric. The color holds through washing. Like any dye, it can fade after long exposure to strong sunlight.
- Can you sublimate on cotton?
- No. The dye bonds with polyester. On cotton it washes out.
- Can you sublimate a dark jersey?
- Not onto dark fabric. A dark sublimated jersey starts as white fabric, and the dark color is printed along with everything else.
- What is the cheapest way to add names and numbers?
- On jerseys made to order, sublimation, because names and numbers are part of the print. On stock jerseys, heat-applied numbers or DTF.
- Is tackle twill better than sublimation?
- They do different jobs. Twill is heavier and looks stitched. Sublimation is lighter, cooler to wear and unlimited in design.
Related articles
- Jersey fabric guide: mesh, interlock, birdseye, dazzle and what GSM meansThe fabrics team jerseys are made from, how they differ, what fabric weight in GSM tells you, and which fabric suits which sport and decoration method.
- Stitch types in sportswear: what a jersey is sewn withLockstitch, chainstitch, overlock, coverstitch, flatlock and zigzag, with their ASTM D6193 and ISO 4915 class numbers and where each one goes on a jersey.
- How to price custom apparelPrice custom apparel from landed cost and a target gross margin. The formula, a worked jersey example, quantity breaks and what to charge separately.
- Jersey number rules for high school sports: sizes, legal numbers and placementNFHS jersey number rules for basketball, football, volleyball, soccer and softball: minimum sizes, legal numbers, contrast, and what changes in 2028 and 2029.
Try UniformsOS free for 30 days
30-day free trial, every module on, no card needed.
