Skip to content

Jersey fabric guide: mesh, interlock, birdseye, dazzle and what GSM means

By UniformsOS Team. Updated .

Why polyester

Polyester is strong, light and cheap. It does not absorb much water, so it dries fast and does not get heavy with sweat. It holds color well through repeated washing. And it is the only common fiber that takes sublimation, which is how most custom team uniforms are printed.

Cotton is comfortable and breathes, but it soaks up sweat and stays wet. It is for T-shirts, hoodies and fan wear, not game jerseys.

Spandex, also called elastane, is added in small amounts where a garment has to stretch and recover: compression gear, fitted jerseys, baseball pants and volleyball uniforms.

The fabrics

Fabric What it is Feel Used for
Interlock A smooth double knit that looks the same on both faces Soft, stable, medium weight Jersey bodies, warmups, most sublimated uniforms
Mesh A knit with open holes, from tiny to large Airy and light Basketball and football jerseys, side panels, practice wear
Birdseye A light knit with a small dimpled texture Dry and textured Soccer jerseys, training tops, polos
Micro mesh A fine mesh with very small holes Smooth with good airflow Jersey bodies where a clean print and airflow are both wanted
Dazzle A shiny, tightly knitted polyester Slick and bright Shoulder yokes, trim, basketball and football shorts
Double knit A heavier, firm knit Thick and durable Baseball jerseys and pants
Pique A knit with a raised waffle texture Textured, holds its shape Coaches' polos
Stretch knit with spandex Polyester with 8 to 20 percent spandex Tight, stretchy Compression tops, fitted jerseys, volleyball
Fleece A knit brushed soft on the inside Warm and thick Hoodies and sweatpants

Names vary between mills and suppliers. One factory's "pro mesh" is another's "air mesh". Ask for a swatch and the weight, not only the name.

What GSM means

GSM is grams per square meter. It is the weight of the fabric, and it is the most useful single number on a spec.

US suppliers often quote ounces per square yard. One ounce per square yard is about 34 GSM.

Weight GSM Typical use
Light 120 to 150 Soccer jerseys, running tops, summer training wear
Medium 150 to 190 Basketball and volleyball jerseys, most interlock uniforms
Heavy 190 to 260 Football and hockey jerseys, baseball double knit
Fleece 250 and up Hoodies and sweatpants

These are typical ranges, not rules. Heavier fabric is more durable and less see-through. Lighter fabric is cooler and cheaper to ship. White jerseys in a light fabric show what is under them, so check opacity on a white swatch.

Moisture wicking

Wicking means the fabric pulls sweat away from the skin and spreads it out so it dries. Polyester helps because it does not absorb the water. The knit structure does the rest.

Some fabrics wick because of how the yarn and knit are made. Others rely on a chemical finish, which can fade with washing. Ask the supplier which one you are buying if it matters to the customer.

Fabric and decoration

Decoration What the fabric needs
Sublimation Polyester, white or very light. The smoother the face, the sharper the print. Open mesh prints with less detail because part of the surface is holes
Screen printing Works on cotton and blends easily. On polyester it needs low-bleed inks so the fabric dye does not tint the print
Tackle twill A stable fabric that can carry the weight of sewn-on numbers
Embroidery A firm knit. Thin stretchy fabrics pucker under dense stitching
DTF Most fabrics, pressed at a lower temperature on polyester

More in jersey decoration methods compared.

By sport

Sport Common fabric Why
Basketball Interlock or micro mesh body, mesh side panels Airflow and a clean print
Football Heavier mesh or stretch knit body, dazzle or stretch yokes It is worn over pads and gets grabbed
Soccer Light interlock or birdseye Ninety minutes of running
Baseball and softball Double knit, or lighter interlock for sublimated styles Sliding and durability
Volleyball Stretch knit with spandex A close fit that moves
Hockey Heavy mesh or knit, cut wide Worn over pads
Lacrosse Mesh Heat and contact

What to test before you commit

  1. Opacity. Hold a white swatch over a dark print.
  2. Stretch and recovery. Pull it and see whether it returns.
  3. Snagging. Run something rough across it. Open mesh snags more.
  4. Pilling. Rub two swatches together for a minute.
  5. Color after washing. Wash a printed swatch five times.
  6. Shrinkage. Measure before and after washing.
  7. Feel when wet. Some fabrics cling.

A swatch card from the factory with the weight written on each fabric answers most questions before a sample is made.

What to put on the spec

  • Fiber content, such as 100 percent polyester or 88 percent polyester and 12 percent spandex.
  • Knit type.
  • Weight in GSM, with a tolerance.
  • Color, or white for sublimation.
  • Any finish, such as wicking.
  • Where each fabric goes, if the garment uses more than one.

The fabric line belongs in the tech pack, so that a reorder next season is made from the same cloth.

FAQ

What fabric are most team jerseys made of?
Polyester knit, most often interlock or mesh. It is light, dries fast and can be sublimated.
What does GSM mean in fabric?
Grams per square meter. It is the weight of the fabric. A higher number means a heavier, thicker fabric.
What is the difference between mesh and interlock?
Mesh has open holes and moves more air. Interlock is a smooth, closed double knit that prints more sharply and is less see-through.
Is heavier fabric better for jerseys?
It is more durable and more opaque, and it is also warmer. Contact sports use heavier fabrics. Running sports use lighter ones.
Can cotton jerseys be sublimated?
No. Sublimation dye bonds with polyester only.

Try UniformsOS free for 30 days

30-day free trial, every module on, no card needed.

All articles