Skip to content

Embroidery digitizing

Embroidery digitizing is the work of converting artwork into a stitch file that tells an embroidery machine where every stitch goes, in what order and in which direction.

Why a logo file is not enough. A machine cannot read a picture. Someone has to decide how each shape will be built from thread. That is skilled work done in software, and two digitizers will produce different results from the same logo.

What the digitizer decides.

  • The stitch type for each area. Satin stitches for lettering and borders, fill stitches for large areas, running stitches for fine lines.
  • The underlay: stitches laid first to hold the fabric and lift the top stitching.
  • The direction and density of the stitches.
  • Compensation for pull. Thread draws the fabric in, so shapes are made slightly wider than they look on screen.
  • The sewing order, and where the thread is trimmed between parts.

What it costs. Usually a one-time charge per design. The price of the embroidery itself then follows the stitch count.

One file does not fit everything. A file made for a polo chest may pucker a thin performance fabric or sink into fleece. Caps are sewn on a curved frame and need their own version. Changing the size by more than a little also means digitizing again, because the stitch count has to change with it.

Limits to respect. Lettering below about a quarter inch in height fills in and stops being readable. Fine gradients and tiny detail do not translate to thread. Simplify the artwork before it is digitized.

Check the sew-out. Ask for a photo of the design stitched on the same kind of fabric before the run. A stitch file is proven by sewing it.

Related: tackle twill, screen printing, strike-off.

Updated .

All glossary terms