Skip to content

Plastisol ink

Plastisol ink is a screen printing ink made of PVC particles suspended in a liquid plasticizer, which stays wet until it is heated and then fuses into a flexible film.

Why printers use it. It does not dry in the screen, so a press can run all day without the ink clogging. It is also opaque enough to cover dark garments.

Curing. Plastisol does not air dry. The whole ink layer has to reach its cure temperature, around 320°F for standard plastisol. Low-cure inks fuse at lower temperatures. Ink that is under-cured looks fine coming off the dryer and cracks or washes out later. Stretch a print and wash a sample to check.

On polyester. Heat makes the dye in a polyester garment migrate into the ink. Printers answer with low-bleed inks, a blocking underbase and lower cure temperatures. See colorfastness.

Feel. Plastisol sits on top of the fabric. A large solid print feels thick and blocks airflow, which is one reason it is used on tees and hoodies more than on game jerseys. Water-based inks soak into the fabric and feel softer, and they cover dark garments less well.

Children's garments. Ask the ink supplier for the test reports described in US apparel labeling requirements.

On a team order. Plastisol suits spirit wear and practice tees where every piece carries the same design in one or two colors. It does not suit individual names and numbers, because each one would need its own screen.

Related: screen printing, DTF, heat transfer vinyl.

Updated .

All glossary terms