Skip to content

US labeling and safety rules for custom apparel: a plain summary

By UniformsOS Team. Updated .

This is a summary for people who run apparel businesses. It is not legal advice. The rules are enforced by the Federal Trade Commission (FTC) and the Consumer Product Safety Commission (CPSC). Read the official text, linked at the end, before you rely on any of it.

The rules at a glance

Requirement Applies to Agency Where it lives
Fiber content, country of origin, business identity Most textile clothing FTC Textile Act rules, 16 CFR Part 303
Care instructions Most textile clothing FTC Care Labeling Rule, 16 CFR Part 423
Flammability All wearing apparel, with listed exceptions CPSC 16 CFR Part 1610
Testing, certificate and tracking label Products made primarily for children 12 and under CPSC Consumer Product Safety Improvement Act
Drawstrings Children's upper outerwear CPSC 16 CFR Part 1120 and ASTM F1816-97

Fiber content

The label lists each fiber by its generic name with its percentage by weight, largest first. "100% polyester." "88% polyester, 12% spandex."

Points from the FTC's guidance that come up in teamwear:

  • There is a 3 percent tolerance. A label that says 40 percent cotton can cover 37 to 43 percent. There is no tolerance when the label says 100 percent.
  • A fiber that is under 5 percent is generally listed as "other fiber". The exception is a fiber with a real function at that level, such as spandex for stretch, which can be named.
  • Decoration such as embroidery or applique does not have to be counted if it covers 15 percent or less of the surface. The label can say "exclusive of decoration".

Country of origin

Imported clothing names the country where it was made. Clothing made in the United States from imported fabric says so, for example "Made in U.S.A. of imported fabric".

On a garment with a neck, the origin label goes on the inside center of the neck, midway between the shoulder seams, or next to another label that is there.

Business identity and the RN

The label must identify the manufacturer or another business responsible for the product, either by company name or by RN.

An RN is a registered identification number issued by the FTC to US businesses that make, import or sell textile products. It is optional. It lets you put a short number on the label in place of your full company name.

Care instructions

Care instructions must be on a label that stays attached and readable for the life of the garment. The other required information only has to stay attached until the garment reaches the consumer, so many businesses put everything on the permanent care label.

What this means for decorators and dealers

If you buy finished blanks and decorate them, the blank already carries its labels. Leave them in.

If you remove the original label and put in your own brand, you are responsible for the new one. It has to carry the required information and identify your business.

If you have garments cut and sewn to order, the labels are yours to specify. Put them in the tech pack: what each label says and where it goes.

Printed neck labels are common on jerseys. The same information is required, and the care instructions still have to last.

Flammability

The clothing flammability standard, 16 CFR Part 1610, applies to adult and children's apparel. It exists to keep dangerously flammable fabrics out of clothing.

Two groups of fabric are exempt from testing under the rule:

  • Plain surface fabrics that weigh 2.6 ounces per square yard or more, whatever the fiber.
  • Any fabric made entirely of acrylic, modacrylic, nylon, olefin, polyester or wool, or a combination of them.

Most polyester jersey fabrics fall in the second group. Fabrics that need attention are very light, sheer ones and raised surfaces such as cotton fleece. Ask the supplier of fleece garments for their flammability documentation.

Children's sleepwear has stricter rules of its own, in 16 CFR Parts 1615 and 1616.

Children's apparel

A children's product is one designed or intended primarily for children 12 years old or younger. Youth team uniforms for those ages are children's products.

The Consumer Product Safety Improvement Act adds four things:

  1. Third-party testing, by a laboratory the CPSC has accepted, for the rules that apply to the product.
  2. A Children's Product Certificate, issued by the manufacturer or importer, based on that testing.
  3. A tracking label: permanent marks on the product and its packaging that identify who made it, where and when, and the batch.
  4. Limits on lead in the product.

Prints on children's garments

This is the part that matters to decorators. The CPSC has determined that textiles, dyed or undyed, do not need lead testing. That determination does not extend to screen prints, transfers and other prints added to the fabric.

If you print on children's garments, ask your ink or transfer supplier for test reports showing that their product meets the limits, and keep them on file. Read the CPSC's guidance for small businesses to see whether you need to issue a certificate of your own for the decorated product.

Drawstrings

Under 16 CFR Part 1120 and the standard it refers to, ASTM F1816-97:

  • Children's upper outerwear in sizes 2T to 12 must not have drawstrings at the hood or neck.
  • In sizes 2T to 16, drawstrings at the waist or bottom may not extend more than 3 inches outside the channel when the garment is opened to its full width. A drawstring that is one continuous string must be bartacked so it cannot be pulled out.

Youth hoodies are the usual place this goes wrong. Order youth hoodies made without hood drawstrings.

A working checklist

For every product you sell:

  • Fiber content, origin and your name or RN are on a label.
  • Care instructions are on a permanent label.
  • You have the supplier's flammability documentation for fleece and other raised or very light fabrics.

For anything made for children 12 and under:

  • You hold a Children's Product Certificate from the manufacturer or importer of the garment.
  • The garment has a tracking label.
  • You hold test reports for the inks or transfers you add.
  • Hoodies and jackets meet the drawstring rule.

Selling outside the United States

Other countries have their own rules. Canada requires labels in English and French. The European Union has its own fiber names and labeling regulation. Check each market before you ship to it.

FAQ

What must a clothing label include in the United States?
Fiber content, country of origin and the identity of the manufacturer or another responsible business, plus care instructions on a permanent label.
Is an RN required on clothing labels?
No. A label can carry the company's name. An RN is an optional number from the FTC that can be used in its place.
Do polyester jerseys need flammability testing?
Fabrics made entirely of polyester are exempt from testing under 16 CFR 1610.1(d). The standard itself still applies.
Are youth team uniforms children's products?
If they are designed or intended primarily for children 12 or younger, yes. The testing, certificate and tracking label requirements then apply.
Can youth hoodies have drawstrings?
Not at the hood or neck in sizes 2T to 12.

Sources

Try UniformsOS free for 30 days

30-day free trial, every module on, no card needed.

All articles