Skip to content

Bartack

A bartack is a short row of dense stitches sewn back and forth over a small area to reinforce a point of stress.

What it looks like. A solid bar of thread, usually well under an inch long. The belt loops and pocket corners on a pair of jeans are held by bartacks.

How it is made. On a dedicated machine that sews a set number of stitches in a set length and width, then stops. It is a lockstitch.

Where it goes on sportswear.

  • Pocket corners and openings.
  • The ends of zippers and plackets.
  • Belt loops on baseball pants.
  • Side vents.
  • Drawcord exits, and the drawcord itself.

Drawstrings on children's outerwear. In the United States, a waist or bottom drawstring on children's upper outerwear in sizes 2T to 16 that is one continuous string must be bartacked, so that it cannot be pulled out of its channel. See US apparel labeling requirements.

On a spec. Mark every bartack on the sketch with its position, length and direction. "Reinforce stress points" leaves the choice to the factory. On a thin knit, a bartack that is too dense cuts the fabric and starts a hole, so the density matters as well.

At inspection. A missing bartack is hard to see until the pocket tears. Put each one on the inspection checklist.

On a team order. Check the belt loops on baseball pants and the pockets on coaches' shorts. Those take the most strain.

Related: lockstitch, tech pack, AQL.

Updated .

Sources

All glossary terms