GSM (grams per square meter)
GSM is grams per square meter, the weight of one square meter of a fabric.
What it tells you. How heavy the fabric is, and roughly how thick. A higher number means more yarn in the same area. Heavier fabric is more durable and less see-through. Lighter fabric is cooler and cheaper to ship.
Typical ranges in teamwear.
| Weight | GSM | Typical use |
|---|---|---|
| Light | 120 to 150 | Soccer jerseys, running tops |
| Medium | 150 to 190 | Basketball and volleyball jerseys |
| Heavy | 190 to 260 | Football and hockey jerseys |
| Fleece | 250 and up | Hoodies and sweatpants |
These are usual ranges, not rules.
Ounces. US suppliers often quote ounces per square yard. One ounce per square yard is about 34 GSM, so a 5 ounce fabric is about 170 GSM. Check that a quote in ounces is per square yard and not per linear yard, which changes with the width of the roll.
How it is measured. A sample of known area is cut from the fabric and weighed. Mills commonly use a round cutter that takes 100 square centimeters, so the weight in grams times 100 is the GSM.
What it leaves out. Two fabrics at the same GSM can feel nothing alike. An open mesh and a tight interlock can weigh the same, and one of them is full of holes. Fiber, yarn and knit structure decide the feel, the stretch and the opacity. Read GSM with a swatch in your hand.
On a spec. Write the weight with a tolerance. No mill hits the number on every roll, and an allowance of about 5 percent either way is common. With a tolerance written down, a fabric that arrives 15 percent light can be refused.
Related: interlock, mesh, bill of materials, tech pack.
Updated .
Articles that use this term
- Jersey fabric guide: mesh, interlock, birdseye, dazzle and what GSM meansThe fabrics team jerseys are made from, how they differ, what fabric weight in GSM tells you, and which fabric suits which sport and decoration method.
- Tech pack checklist: the ten parts a factory needsA checklist of the ten parts of an apparel tech pack, what each must contain, the gaps factories complain about most and how to test yours before sending it.
