Skip to content

Set-in sleeve

A set-in sleeve is a sleeve sewn into an armhole that circles the arm at the shoulder, so the seam runs over the edge of the shoulder and under the arm.

How to recognize it. It is the sleeve of a standard T-shirt. A shoulder seam runs from the neck to the edge of the shoulder, and the armhole seam goes around the arm from there.

Where it is used. Most T-shirts, polos and hoodies, and many game jerseys.

Fit. The shoulder seam should sit at the edge of the shoulder. On a garment that is too small, it sits on top of the shoulder and pulls. On one that is too large, it drops down the arm. That makes a set-in style less forgiving across body shapes than a raglan sleeve.

Sewing. On knits the sleeve is usually attached flat. The shoulder seams are joined, the sleeve is sewn to the open armhole, and the side seam and underarm are closed in one pass, normally with an overlock.

On the spec. Three points of measure describe it: shoulder width from seam to seam, sleeve length from the shoulder seam to the sleeve edge, and the armhole. Each needs a tolerance.

Artwork. The sleeve is a separate panel. A design that runs from the body onto the sleeve breaks at the armhole seam, and the two sides have to be matched in sewing. Sleeve numbers and sponsor logos sit inside the panel and avoid the problem.

On a team order. When players try on a sizing kit, look at the shoulder seam first. It shows a wrong size faster than the chest or the length does.

Related: raglan sleeve, overlock, grading.

Updated .

All glossary terms