Skip to content

Shrinkage

Shrinkage is the change in the length and width of a fabric or garment after washing and drying, given as a percentage of the original measurement.

How to measure it. Mark a known distance on the fabric in both directions. Wash and dry it the way the care label will say. Measure again. The change divided by the original distance, times 100, is the shrinkage. Length and width are reported separately, because they rarely move by the same amount.

The lab test. AATCC TM135 is the test method for dimensional changes of fabrics after home laundering. A mill report that names it states the washing and drying conditions used, which is what makes two reports comparable.

What causes it. Fabric is held under tension while it is knitted, dyed and finished, and washing lets it relax. Cotton fibers also swell in water. Polyester absorbs very little, so polyester jersey fabrics shrink less than cotton ones. Heat is the exception. Polyester can shrink in a sublimation press, which is why factories pre-shrink the fabric or allow for it in the pattern.

How to allow for it. State the limit in the tech pack, for length and for width. Ask the mill for its test report before the fabric is bought. If the fabric shrinks more than the limit, the choices are a different fabric, a pre-washed fabric or a pattern cut larger.

On a team order. Cotton hoodies in a spirit wear store shrink more than the polyester jerseys in the same order. Say on the size chart whether the measurements are before or after washing. One test wash of a sample answers the question before a parent asks it.

Related: tolerance, GSM, colorfastness.

Updated .

Sources

All glossary terms